Ncpa CMD Command – System and utilities

NCPA stands for Network Connections Properties Applet, and is a command line prompt used to manage network connections in Windows operating systems. The NCPA CMD command can be used to create, modify, and delete network connections, as well as to set up and configure network protocols. This command is available in all versions of Windows, from Windows XP to Windows 10.

Syntax of the NCPA CMD Command

The syntax for the NCPA CMD command is as follows:

  • ncpa.cpl – This is the main command for the NCPA CMD command.
  • ncpa.cpl /add – This command is used to add a new network connection.
  • ncpa.cpl /delete – This command is used to delete an existing network connection.
  • ncpa.cpl /modify – This command is used to modify an existing network connection.
  • ncpa.cpl /configure – This command is used to configure a network protocol.

Options of the NCPA CMD Command

The NCPA CMD command has several options that can be used to customize the command. These options include:

  • /all – This option is used to display all network connections.
  • /name – This option is used to specify the name of the network connection.
  • /type – This option is used to specify the type of the network connection.
  • /description – This option is used to specify the description of the network connection.
  • /ip – This option is used to specify the IP address of the network connection.
  • /mask – This option is used to specify the subnet mask of the network connection.
  • /gateway – This option is used to specify the default gateway of the network connection.
  • /dns – This option is used to specify the DNS server of the network connection.

Examples of the NCPA CMD Command

The following are some examples of how to use the NCPA CMD command:

Example 1: Create a New Network Connection

To create a new network connection, use the following command:

  • ncpa.cpl /add
  • /name “My Network Connection”
  • /type “Ethernet”
  • /ip “192.168.1.1”
  • /mask “255.255.255.0”
  • /gateway “192.168.1.1”
  • /dns “8.8.8.8”

Example 2: Modify an Existing Network Connection

To modify an existing network connection, use the following command:

  • ncpa.cpl /modify
  • /name “My Network Connection”
  • /ip “192.168.1.2”
  • /mask “255.255.255.0”
  • /gateway “192.168.1.1”
  • /dns “8.8.8.8”

Example 3: Delete an Existing Network Connection

To delete an existing network connection, use the following command:

  • ncpa.cpl /delete
  • /name “My Network Connection”

Conclusion

The NCPA CMD command is a powerful command line prompt used to manage network connections in Windows operating systems. It can be used to create, modify, and delete network connections, as well as to set up and configure network protocols. The NCPA CMD command has several options that can be used to customize the command, and it is available in all versions of Windows, from Windows XP to Windows 10.

Leave a Reply