The Route CMD command is a powerful tool that allows users to view and modify the IP routing table of a Windows computer. It is used to view and modify the network routing tables used by the Windows operating system. The Route CMD command is also used to control the network traffic flow between different networks and subnets. This command can be used to add, delete, and modify routes in the routing table.
Purpose of the Route CMD Command
The Route CMD command is used to view and modify the IP routing table of a Windows computer. It is used to view and modify the network routing tables used by the Windows operating system. The Route CMD command is also used to control the network traffic flow between different networks and subnets. This command can be used to add, delete, and modify routes in the routing table.
The purpose of the Route CMD command is to allow users to control the flow of network traffic between different networks and subnets. It can be used to add, delete, and modify routes in the routing table. This command is also used to view and modify the network routing tables used by the Windows operating system. The Route CMD command is a powerful tool that can be used to control the network traffic flow between different networks and subnets.
Syntax of the Route CMD Command
The syntax of the Route CMD command is as follows:
- route [add | delete | print] [destination] [mask] [gateway] [metric] [if]
- route [change | delete | add] [destination] [mask] [gateway] [metric] [if]
The parameters of the Route CMD command are as follows:
| Parameter | Description |
|---|---|
| add | This parameter is used to add a route to the routing table. |
| delete | This parameter is used to delete a route from the routing table. |
| This parameter is used to display the contents of the routing table. | |
| change | This parameter is used to modify an existing route in the routing table. |
| destination | This parameter is used to specify the destination address of the route. |
| mask | This parameter is used to specify the subnet mask of the route. |
| gateway | This parameter is used to specify the gateway address of the route. |
| metric | This parameter is used to specify the metric value of the route. |
| if | This parameter is used to specify the interface index of the route. |
Examples of the Route CMD Command
The following are some examples of how to use the Route CMD command:
- To add a route to the routing table:
- route add 10.0.0.0 mask 255.0.0.0 10.0.0.1 metric 1 if 1
- To delete a route from the routing table:
- route delete 10.0.0.0 mask 255.0.0.0 10.0.0.1 metric 1 if 1
- To display the contents of the routing table:
- route print
- To modify an existing route in the routing table:
- route change 10.0.0.0 mask 255.0.0.0 10.0.0.1 metric 1 if 1
Conclusion
The Route CMD command is a powerful tool that allows users to view and modify the IP routing table of a Windows computer. It is used to view and modify the network routing tables used by the Windows operating system. The Route CMD command is also used to control the network traffic flow between different networks and subnets. This command can be used to add, delete, and modify routes in the routing table. The syntax and parameters of the Route CMD command are described in detail in this article, as well as some examples of how to use the command.